Basic knowledge of engraving and polishing of acrylic table card lens frame products

There are a lot of acrylic products used in life. The basic knowledge of engraving and polishing of acrylic card frame products is very important. Therefore, it is necessary for users to understand the basic knowledge of the use of some acrylic products(acrylic box, display stand, brochure holders).

1. The coefficient of thermal expansion of acrylic is large. When placing or fixing, the temperature change should be considered to leave room for expansion and contraction.

2. If the acrylic product is not damaged, use IPS bonding glue/binder methylene chloride adhesive or quick-drying agent.

3, to acrylic products bright and bright, you can use liquid polishing wax, wipe with a soft cloth is a good solution; clean acrylic sheet only need to use 1% soap water, soft cotton cloth with soapy water, not hard objects Or dry rub.

4, the acrylic temperature will be deformed when heated at about 70 degrees, it will soften when heated to more than 100 degrees, so it should be avoided to apply to more than 100 degrees.

5, acrylic polishing, if it is a small scratch, you can directly wipe with a toilet paper or a rag with a little toothpaste.

6, acrylic should be scrubbed with soft cloth, do not use any cleaning agent containing granular objects, do not use a variety of chemical solvents to scrub.

7. Acrylic is easy to crack, and attention should be paid to surface protection when handling.

In the process of using acrylic products, we will definitely encounter some unexpected conditions. Therefore, in order to avoid being in a hurry when encountering problems, we will definitely know about acrylic products through our explanation above.