What are the acrylic bonding methods?

Acrylic bonding is a very important part of acrylic processing. How to show the clear and transparent characteristics of acrylic, reflect the value of acrylic crafts, maximize the grade and taste of products, bonding technology plays a decisive role.

1.Plane bonding: Plane bonding is a special bonding method. First wipe the surface to be cleaned and place it horizontally, and apply a proper amount of adhesive to it. Place one side of the other acrylic sheet obliquely on the acrylic sheet to which the adhesive is applied, and then slowly and evenly lay it down to remove the bubbles from one side to complete the bonding.

2.Docking: Place two acrylic sheets to be butted on the operating platform, close them, and stick a tape on the bottom, leaving a gap of no more than 0.3mm to prepare the adhesive. Use a syringe to inject the adhesive from one side evenly and slowly from the gap until it is fully filled. After the film is fully cured, remove the tape.

3.Facade bonding: Facade bonding is one of the most widely used bonding techniques and is widely used in the production of various acrylic crafts. First wipe the surface to be bonded clean. It is better to use the master to achieve bonding so that the bond does not shake, which is beneficial to improve the quality of the bond.

4.Bevel bonding: The bonding bevel must use a mold such as a 90 degree angle to prevent the displacement of the surface to be bonded. The application adhesive should be uniform and slow. The mold can be removed after it has been completely cured.

Sunday Knight customize a wide range of custom-made acrylic crafts,acrylic box, acrylic display stand with fast shipping and good quality.